Comments

CUSTOM MADE---- 9 horse cross load gooseneck. 28ft 6in on the floor, 8ft neck, 102in wide, 7ft 6in tall. All aluminum construction, single piece aluminum roof, Rumber solid rubber flooring, exterior lower 48in extruded aluminum slats with black sheets above slats, 2 x 8000 lb. rubber torsion axles, with hydraulic drum brakes, 5 x LT235/70-17.5 Michelin radial tires, on aluminum rims --nitrogen filled---(includes spare), 2 x 16,200 lb. safety chains, charging break away system, with LED charge indicator lamps, 7 pin RV style electrical plug, mirror stainless steel nose sheet, all LED running lights 13 exterior lights on roof corner--each side, double tail lights, side turn signal light each side in front of fender, 3 amber markers across the front, LED reverse lights, 20,000lb manual jack, with spring loaded foot, adjustable 2-5/16in coupler built into powder coated steel tubing super structure neck, all walls and ceiling fully insulated and lined.


Horse Area: 8 x stalls at 32in at the hinge center line, rear stall 38", 24in deep smooth side dividers, with solid head and shoulder guards (7ft tall), tubular box stall gate, and removable stud partition to 2nd and 7th divider, add escape door at head of second stall, ramp and double dutch doors to rear of front 2 stalls, all dividers have spring latches, allowing to open either direction, SCT HD drop down feed doors at horses heads, bus style sliding windows to horses rumps, raised at 1st,2nd,4th,6th,8th, with SCT HD drop down rump windows at 3rd,5th,7th,9th, 5 flettner wind powered vents to horse area, HDPE plastic utility lining on walls to 48in, 090 aluminum sheeting to interior wall on rump side, 6" padded rump bar to wall to back 7 stalls. 3 x horse ties per stall, butterfly rear doors, with SCT full swing hinges (doors fold against side of trailer) with sliding windows, full width rear ramp behind rear doors, 4 x 11"LED interior lights, 2 LED loading lights on rear (inside lights and outside lights on separate switches), 5 exterior stainless steel ties each side, bolted through the walls (not screwed).


Dressing room: 4ft straight wall, neck area and bulk head wall carpeted, with aluminum angle wear strip over wall and floor edge, bus style slide windows in neck area, Shetron manufactured entry door, with slide window on drivers side, fold up aluminum step, clothes rods in ceiling, stainless steel foot step on bulk head wall, 2 x 11" LED interior lights switch inside wall rear of door, LED porch light over entry door, aluminum brush tray on door, 18 x aluminum bridle hooks, 2 infra-red hard wired monitor camera to horse area, and 7" color monitor for tow vehicle, including direct wire coil trailer cable and plugs, buggy roof rack, including access ladder, and buggy rack on rear.